# OpenRobot Stereo-cap Solo

> Stereo-cap Solo is OpenRobot's head-worn stereo capture system with compute
> on board. It is controlled from a phone and records to microSD. It has no
> receiver. Shipping now. USD 350 per device.

## Best fit

Stereo-cap Solo is for robotics teams, physical-AI labs, and data programs
capturing hands, objects, close-range manipulation, and spatial task work. It
fits when the workflow needs synchronized left/right video, calibrated
geometry, and high-rate motion data from the head, with no receiver and no
laptop in the capture loop.

For synchronized head-and-wrist capture, choose Full Rig: a receiver Stereo-cap
head plus a Mono camera module on each wrist.

It is capture hardware. It does not claim built-in hand tracking, 3D pose
estimation, cloud processing, or tactile sensing.

## Specifications

| Specification | Value |
|---|---|
| Cameras | Two global-shutter colour cameras, synced stereo |
| Output per eye | 1920 x 1200 at 30 fps |
| Field of view | 110 H, 80 V, 120 D degrees, +/-3 each, nominal lens, before rectification |
| Baseline | About 60 mm |
| Video layout | Side-by-side stereo, left and right in one stream |
| Bitrate | 10 Mbps or more per eye-half |
| Session length | Configurable; recorded in chunks |
| IMU | 6-axis + 3-axis magnetometer; about 505 Hz nominal, magnetometer 100 Hz; +/-1000 dps, +/-4 g |
| Exposure | Fixed indoor and outdoor profiles, chosen in the OpenRobot mobile app (iOS and Android) |
| Calibration | Factory-calibrated per unit; field teams recalibrate as their requirements need |
| Compute | On board |
| Recording | On board, to microSD |
| Control | From your phone |
| Receiver | None |
| Microphone | Yes; off unless enabled in software or firmware |
| Storage | Swappable microSD card (bring your own) |
| Power | Bring your own compatible USB power bank |
| Price | USD 350 per device; shipping and taxes quoted per order |
| Lead time | 1-2 weeks |
| Warranty | 6 months consumer hardware warranty |

Values are document-stated. Stereo-cap Solo unit measurements are not yet
published. The sample recordings were made through the receiver, not on a Solo
unit. Ask OpenRobot before relying on a value that is not listed here.

## Canonical resources

- Product page: https://theopenrobotcompany.com/stereo-cap-solo
- Sample data: https://theopenrobotcompany.com/stereo-sample-data.md
- Device catalog: https://theopenrobotcompany.com/devices.md
- Contact: founders@theopenrobot.com
